Blade grinding / Laboratory mill, dry sample preparation with power cable, blade grinding attachment incl. inside extractor, sieve 2.0 mm, tool set, rack for tubes with 12 intercepting tubes (100 – 120 V)
Analysis or quality control requires finely ground samples. Easy to change grinding attachments and sieves extend the range of any samples that can be processed. Simple handling, high user safety and efficient grinding results are just a few of the advantages of this mill.
This laboratory mill is characterized by a very robust design using solid milled parts and hardened components that have been designed for high wear and tear found with such processes as grinding of stones which can have a hardness of up to 6 on the Mohs scale. You will receive tried and tested Swiss quality.
Attainable Particle Sizes:
< 40µm (depending on product)
Sieve Kernel Sizes:
1 / 5 of sieve diameter is the approximately attainable kernel size e.g. sieve 0.2 mm / 5 = 0.04 mm (40µm)
Grinding Attachment Variants:
Hammering / Cutting from hardened stainless steel
Hammer attachment: brittle samples Cutting attachment: stringy, fibrous samples
| Power (W) | 1000 |
| Funnel volume | 300 ml |
| Product discharge | For collection tubes with norm grinding NS29 |
| Sieves | 0.2 to 6 mm mesh size |
| Grinding attachments (convertible) | Blade grinding attachment |
| Motor | Wear-free three-phase motor / Gearless direct drive / Security system auto-off |
| Speed range | 50 – 6000 rpm |
| Sound level | 70 dB(A) for 6000 rpm |
| Supply voltage | 100 – 230 V ± 10 %, 50Hz / 60Hz |
| Relative humidity (max.) | 80 % in storage / 80 % during operation |
| Operating temperature | 0 – 40 °C |
| Protection class acc. to DIN | IP 20 |
| Measurements (L x W x H) | 325 x 251 x 480 mm |
| Weight | 12 kg |
| EMC standards | IEC / EN 61000-6-2 / EN 61000-6-3 |
| Safety standard | IEC / EN 61010-2-51 |